ABSTRACT
Objective To develop a reasonable plan of monitoring personal internal exposure dose. Methods This paper introduced the methods of monitoring the individual dose and direct measurement of three representative radionuclides. Results The maximum monitoring periods were determined according to the radionuclide retention characteristics and the reporting standards and requirements, which were m(1)/m(T/2) ≤ 3 and m(T/2)/m(T) ≤ 3. The lower detection limit of the instrument was derived from the monitoring periods and the annual radionuclide intake limit, which should be lower than the derived method detection limit of the corresponding radionuclide. Then the measuring duration of the instrument that meets the corresponding conditions was derived from the derived method detection limit of the instrument and the maximum monitoring period. Conclusion Our results provide a reference for the formulation of a plan of monitoring personal internal exposure dose.
ABSTRACT
Objective To establish a radioactive waste sorting process. Methods According to the current laws, regulations, standards, waste minimization requirements, and domestic good practices, the non-radioactive waste and radioactive waste were distinguished, and the radioactive waste was further sorted according to the different subsequent disposal methods of radioactive waste. The precautions for each step of the sorting process were described in detail. Results This process has been used in sorting decommissioned radioactive waste in an urban waste repository and achieved good results. Approximately 83 tons of radioactive waste and 1173 waste radioactive sources were sorted. Conclusion Good radioactive waste sorting technology can not only distinguish between radioactive and non-radioactive waste, but also facilitate the subsequent disposal of radioactive waste, which minimizes radioactive waste and protects staff and the environment.